Search results for: 'strips print and'

You have loaded film into your camera, composed your image and pressed the shutter. You have now captured an image on your film. When that film is processed, it reverses the tones of the subject. In simple terms, the image is dark where the subject was light, and light where the subject was dark. That resulting image is known as a negative. What do I do with them? Negatives are normally then used to make prints by reversing the image a second time to restore the light and dark areas to their original tone...

Processing your own film can speed up your workflow and give you quicker access to your negatives. It is also typically more cost effective and best of all there is nothing like the sense of satisfaction you will gain by taking control over the full end-to-end process of your photography. While trying it for the first time might be a daunting prospect, fear not. Below is our guide on what equipment, chemistry and method would be suitable for anyone new to processing films. For more detail, you can downlo...

The first stage of making a darkroom print is to determine the exposure time. If you have already created a contact sheet of your negatives, and they appear correctly exposed, then you should have a rough idea of the necessary exposure (provided you haven’t moved the enlarger head or aperture setting after exposing the contact sheet). Note: If you change the degree of enlargement you will also need to adjust the exposure. Some enlargers have scales printed on their columns to make this easier. Another...

A black border often enhances a print and does not involve any sort of mounting or overlay. Ink or tape borders The easiest way to produce narrow black borders is to rule them with a pen directly onto your finished print: an India-ink pen gives the most solid line, but most permanent (all surface) spirit based markers are much less expensive and will do the job. For slightly wider black borders, narrow, self-adhesive strips are available from graphic arts suppliers. Supplied in dispensers, of various w...

Mounting your Prints Even the most stunning print can look better when it has been properly mounted. Mounted prints are also better protected as they are kept flat with the image separated from the immediate surroundings by unobtrusive margins. There are no hard and fast rules about mounting prints; the most suitable results will depend on individual preference, the nature of the image, the intended use and other circumstances. It is recommended that only boards and other materials intended for the p...

What is the luminogram process? The Luminogram process is light, directed onto photo paper in the darkroom. About as basic as ‘photography’ can get. It has been with us for a long while. László Moholy-Nagy (1895-1946) started using it in 1922, while Gottfried Jäger described it as "the result of pure light design; the rudimentary expression of an interaction of light and photosensitive material… a kind of self-representation of light." And yet it has always seemed to sit on the sideline...

1992 - How I met Masterji Soon after leaving my staff photographer’s position on the local newspaper where I’d been employed for the previous 5 years and with the luxury of in-house film processing no longer a convenient option I began using my local city centre professional colour lab, in Coventry. During the accumulating hours I spent in that lab waiting for my 35mm films to process, watching small colour prints dropping from the conveyor belt from the end of the machine, I very watched a short In...

Images with feeling The most attractive element of analogue is its delicacy. The analogue process has remained so ingrained into my practice, I can't imagine working in any other way. Seeking images which stir a feeling within and seeing that image through each stage of the process to finally create a hand-made darkroom print. The print may not be perfect, I do not tirelessly work on test strips creating a technically perfect image, I never leave the confines of the darkroom to inspect the print once it...

Mindtraveller Technical info Film Used: ILFORD HP5+ (pushed to 3200) Format: 120, shot as 6x7 Camera : Mamiya RB67 Pro SD Lens: Sekor 50mm f4.5 Exposure time: 20 minutes Other equipment: Tripod Location: Norman Wells, Northwest Territories, Canada Tell us the story behind this image. What inspired you to shoot it? In the Canadian Arctic, we are gifted with the otherwise-evasive Aurora Borealis on almost a nightly basis.  On many nights, the spectacle is nothing more than a faint gre...

In the midst of ever more sophisticated technology we live with the illusion of saving time by doing things with more speed, and increasingly relying on computers: programmes work out difficult problems, they plan for us, think for us. Files, servers and systems store information for us, including photographs - hundreds of millions of photographs. A Slow Practice Samburu warriors, Kenya Rob Fraser is drawn to photograph people whose lives are shaped by traditional practices rooted in specific lands...