Search results for: 'cover pre'

Whether you are new to film photography or picking it up again after a number of years, it is very easy to get started and a rewarding activity regardless of your level of expertise. Introduction to film photography To get you started we've created a series of animations that will introduce you to the world of film photography. These short 60 second animated videos cover a range of topics and terminologies to quickly get you up to speed. From f-stop to film types, these videos are the perfect entry point...

Hand colouring The idea of adding colour to a monochrome image by hand dates back to the beginning of photography. At this time it was the only way to get a colour photograph. Although colour photography using the three colour process was put forward just short of thirty years after the first photograph by Nicephore Niepce,  it was, in its early years, expensive and difficult to produce a colour image. Hand colouring became a practical way to give the impression of colour and everything from Daguerroty...

29th July 2015 HARMAN technology Ltd, of Mobberley, Cheshire is among the winners in the RoSPA Occupational Health and Safety Awards 2015.   The Order of Distinction (24 consecutive Golds) award has been received in the prestigious annual scheme run by the Royal Society for the Prevention of Accidents (RoSPA). As the UK’s family safety charity, RoSPA’s mission to save lives and reduce injuries covers all ages and stages of life. In support of this mission, the RoSPA Awards, which date b...

1st September 2014 HARMAN technology Ltd, of Mobberley, Cheshire is among the winners in the RoSPA Occupational Health and Safety Awards 2014. The Order of Distinction (23 consecutive Golds) award has been received in the prestigious annual scheme run by the Royal Society for the Prevention of Accidents (RoSPA). As the UK’s family safety charity, RoSPA’s mission to save lives and reduce injuries covers all ages and stages of life. In support of this mission, the RoSPA Awards, which date back 58 y...

Film and single use cameras How long after exposing can I leave my film before processing? For best results, we always advise processing soon after exposure although in practice most films can be left for several months. One exception is ILFORD PANF Plus, we would always advise processing this film as soon as possible and certainly within 3 months of the film being exposed. How do I account for film reciprocity during long exposures? This information can be found in the Film Reciprocity Failure Compensa...

Photographic Paper FAQ's Which paper product is best/suitable for photograms.  All of our ILFORD photographic papers will easily produce photograms, so the choice will depend on which surface finish you prefer and whether or not you want fibre or resin coated. Resin coated paper is lower cost, easy to process and dry flat and would be a good choice for starting out. Does reciprocity affect paper? Paper products are designed for much longer exposure times than film and are less sensitive to reciprocity...

Health & Safety FAQ's Using Photographic Chemicals whilst Pregnant or Breast Feeding This is covered in our health and safety section,  Where can I find you Health and Safety Data Sheets Please visit our health and safety section, where all our MSDS can be found What ventilation do I need in my darkroom?  Smells and fumes from darkroom chemicals and heat from enlargers and lamps are best eliminated by some sort of extract in the room OR by opening the room up between processes. If you ...

The first stage of making a darkroom print is to determine the exposure time. If you have already created a contact sheet of your negatives, and they appear correctly exposed, then you should have a rough idea of the necessary exposure (provided you haven’t moved the enlarger head or aperture setting after exposing the contact sheet). Note: If you change the degree of enlargement you will also need to adjust the exposure. Some enlargers have scales printed on their columns to make this easier. Another...

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

Split grade printing The version of split grade printing described here is that taught to me by the ILFORD head printers, Mike Walden and Terry Offord, and is the simplest, fastest way to make good darkroom prints from pretty much any negative. (The exception is really underexposed negatives to print these you usually only need high contrast). This is a very powerful technique that can be used routinely with variable contrast (VC) papers, such as ILFORD MULTIGRADE. It makes use of the differing performa...