Search results for: 'art and the work'

The first stage of making a darkroom print is to determine the exposure time. If you have already created a contact sheet of your negatives, and they appear correctly exposed, then you should have a rough idea of the necessary exposure (provided you haven’t moved the enlarger head or aperture setting after exposing the contact sheet). Note: If you change the degree of enlargement you will also need to adjust the exposure. Some enlargers have scales printed on their columns to make this easier. Another...

What are film developers? Film developers are a photographic chemical that turns your exposed film into working negatives as part of a processing workflow. (You will also need a stop bath and fixer - for more information on how to process your film or which chemistry to choose read our guides). We offer a broad range of film developers that are designed to exploit the different characteristics of our films. Developers are available in either powder and liquid concentrate form and have a range of charact...

Although many film cameras have inbuilt light metering systems, a light meter instrument can also be used. Light Meters can measure the amount of light falling on a subject (incident light), or being reflected by a subject (reflective light). By converting these measurements, it defines what would be the most beneficial shutter speed and f/stop to use for that given subject. Light Meters are particularly helpful where subject matter / lighting conditions are difficult. Some light meters are also able to...

Having shot a roll of black and white film it now needs to be processed to create the negatives. At this point your film is still light sensitive so should not be exposed to light. Processing your own film can be highly satisfying and cost effective. It is also easy to learn. The most common method for hand processing film is undertaken by using a Daylight Processing Tank. This piece of kit needs the film to be loaded on to a ‘spiral’ or ‘reel’, in the dark, and then enclosed in a light tight co...

Filters have long been a popular accessory for photographers and offer a number of different functions or effects. In both analogue and digital photography it is possible to recreate some of these in the darkroom or digital darkroom. However there has always been a benefit to getting it right in camera. In black & white photography, colour filters in particular are useful as they can control how the colours in a scene are reproduced as greys. Normal black & white films are sensitive to all wavele...

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

Retouching is normally done to remove blemishes from the negative or the final print. It can also be used to change the tone or remove unwanted detail.  As retouching can be difficult, care is required. Advice for retouching The most risky retouching techniques involve removing parts of the image, by bleaching, cutting, or scraping with the edge of a sharp knife. The addition of density is generally less risky, and can be done using dye, paint etc, or a suitable soft pencil. When retouching prints from o...

Mounting your Prints Even the most stunning print can look better when it has been properly mounted. Mounted prints are also better protected as they are kept flat with the image separated from the immediate surroundings by unobtrusive margins. There are no hard and fast rules about mounting prints; the most suitable results will depend on individual preference, the nature of the image, the intended use and other circumstances. It is recommended that only boards and other materials intended for the p...

The ILFORD PHOTO Archival Sequence, or Optimum Permanence wash system is a method of processing fibre base papers for maximum longevity while reducing the amount of water and time used. Whilst standard fixing and washing recommendations will give excellent print permanence for all commercial needs. When optimum permanence is needed, perhaps for archival storage of prints, the following fixing and washing sequences at 18–24ºC/65–75ºF (including wash water) are recommended using ILFORD WASHAID. Fi...

Split grade printing The version of split grade printing described here is that taught to me by the ILFORD head printers, Mike Walden and Terry Offord, and is the simplest, fastest way to make good darkroom prints from pretty much any negative. (The exception is really underexposed negatives to print these you usually only need high contrast). This is a very powerful technique that can be used routinely with variable contrast (VC) papers, such as ILFORD MULTIGRADE. It makes use of the differing performa...