Search results for: 'ake format a'

Film and single use cameras How long after exposing can I leave my film before processing? For best results, we always advise processing soon after exposure although in practice most films can be left for several months. One exception is ILFORD PANF Plus, we would always advise processing this film as soon as possible and certainly within 3 months of the film being exposed. How do I account for film reciprocity during long exposures? This information can be found in the Film Reciprocity Failure Compensa...

Photographic Paper FAQ's Which paper product is best/suitable for photograms.  All of our ILFORD photographic papers will easily produce photograms, so the choice will depend on which surface finish you prefer and whether or not you want fibre or resin coated. Resin coated paper is lower cost, easy to process and dry flat and would be a good choice for starting out. Does reciprocity affect paper? Paper products are designed for much longer exposure times than film and are less sensitive to reciprocity...

This guide focuses on the photo chemicals you can use for processing film. We also have a guide to processing film as well as some handy tips on loading a developing spiral. Choosing photo chemicals We have a range of photo chemicals designed to give different results with our films and papers. The choice of stop bath and fixer is limited but we have several film developers you can use. Film developers come in either liquid and powder concentrate form and have a range of attributes. Some developers giv...

ILFORD PHOTO offer the biggest range of black & white films on the market today. While this is perfect for experienced film photographers who love having a choice, we appreciate that it can be a bit confusing for people new to film photography. If you are looking to try film photography for the first time and are wondering where to start, then you have come to the right place. We should start by pointing out that there is no ‘wrong’ choice when it comes to ILFORD films. They are all fantastic,...

Processing your own film can speed up your workflow and give you quicker access to your negatives. It is also typically more cost effective and best of all there is nothing like the sense of satisfaction you will gain by taking control over the full end-to-end process of your photography. While trying it for the first time might be a daunting prospect, fear not. Below is our guide on what equipment, chemistry and method would be suitable for anyone new to processing films. For more detail, you can downlo...

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

Retouching is normally done to remove blemishes from the negative or the final print. It can also be used to change the tone or remove unwanted detail.  As retouching can be difficult, care is required. Advice for retouching The most risky retouching techniques involve removing parts of the image, by bleaching, cutting, or scraping with the edge of a sharp knife. The addition of density is generally less risky, and can be done using dye, paint etc, or a suitable soft pencil. When retouching prints from o...

What is the luminogram process? The Luminogram process is light, directed onto photo paper in the darkroom. About as basic as ‘photography’ can get. It has been with us for a long while. László Moholy-Nagy (1895-1946) started using it in 1922, while Gottfried Jäger described it as "the result of pure light design; the rudimentary expression of an interaction of light and photosensitive material… a kind of self-representation of light." And yet it has always seemed to sit on the sideline...

1992 - How I met Masterji Soon after leaving my staff photographer’s position on the local newspaper where I’d been employed for the previous 5 years and with the luxury of in-house film processing no longer a convenient option I began using my local city centre professional colour lab, in Coventry. During the accumulating hours I spent in that lab waiting for my 35mm films to process, watching small colour prints dropping from the conveyor belt from the end of the machine, I very watched a short In...

How I work I believe in self-learning, and I’m always up for something new to explore. I adhere to a strict code of conduct and don’t believe in photoshop, or do much if any post processing. It has to be an exceptional day for me to crop an image. I use Ilford’s Delta 400 for most of my work and use XP2 Super when I need my results fast. Changing times I was born in 1988, which meant that I got a first class ticket to experience the world converting from analogue to digital during m...