Search results for: 'your make makes on'

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

A black border often enhances a print and does not involve any sort of mounting or overlay. Ink or tape borders The easiest way to produce narrow black borders is to rule them with a pen directly onto your finished print: an India-ink pen gives the most solid line, but most permanent (all surface) spirit based markers are much less expensive and will do the job. For slightly wider black borders, narrow, self-adhesive strips are available from graphic arts suppliers. Supplied in dispensers, of various w...

Mounting your Prints Even the most stunning print can look better when it has been properly mounted. Mounted prints are also better protected as they are kept flat with the image separated from the immediate surroundings by unobtrusive margins. There are no hard and fast rules about mounting prints; the most suitable results will depend on individual preference, the nature of the image, the intended use and other circumstances. It is recommended that only boards and other materials intended for the p...

Testing your Safelights Safelights are an essential component in any darkroom set up. We recommend testing them annually, as ageing can change the transmission characteristics of the filters. This can cause visible fogging of the print or, more likely, a subtle but noticeable drop in contrast. When setting up your safelights always read the instructions and don't exceed the recommended bulb wattage. Fitting a brighter bulb or mounting your safelight too close to your developing dishes,  may cause degra...

The ILFORD PHOTO Archival Sequence, or Optimum Permanence wash system is a method of processing fibre base papers for maximum longevity while reducing the amount of water and time used. Whilst standard fixing and washing recommendations will give excellent print permanence for all commercial needs. When optimum permanence is needed, perhaps for archival storage of prints, the following fixing and washing sequences at 18–24ºC/65–75ºF (including wash water) are recommended using ILFORD WASHAID. Fi...

What is the luminogram process? The Luminogram process is light, directed onto photo paper in the darkroom. About as basic as ‘photography’ can get. It has been with us for a long while. László Moholy-Nagy (1895-1946) started using it in 1922, while Gottfried Jäger described it as "the result of pure light design; the rudimentary expression of an interaction of light and photosensitive material… a kind of self-representation of light." And yet it has always seemed to sit on the sideline...

I’m a passionate film photographer. There are plenty of us about and indeed plenty of reasons for choosing film as a medium. Many of these reasons are quoted ad nauseam by any and every film photographer. One of the biggest problems I have with digital photography is that it's given film photographers a soap box to waffle on about how much better film is… Yawn… I’m going to make some assumptions about the audience of this blog, and as such I’m not going to repeat all of the justifications usually ...

My name is Charles, I do film concert photography since September 2014. I chose analog over digital because I like to do things with my hands instead of using a computer. I mostly use HP5+ film (pushed to 1600 ISO) which I find very powerful in difficult light conditions, it’s a good compromise between precision, grain, and dynamic range. Concert photography is easy and difficult at the same time. It’s easy to take a picture of a charismatic singer on stage, but is this enough to have a great photo...

How I work I believe in self-learning, and I’m always up for something new to explore. I adhere to a strict code of conduct and don’t believe in photoshop, or do much if any post processing. It has to be an exceptional day for me to crop an image. I use Ilford’s Delta 400 for most of my work and use XP2 Super when I need my results fast. Changing times I was born in 1988, which meant that I got a first class ticket to experience the world converting from analogue to digital during m...

Choosing Photo Chemicals We have a range of photo chemicals for printing/processing all of our resin coated and fibre base papers in trays/dishes as well as in processing machines. If you are new to printing the choice could appear excessive yet each liquid or powder paper developer has its purpose or strengths. For an overview of the whole range and what they do we have pulled together an introductory overview. If you are a beginner* and wondering where to get started then read on. *While thi...